Need Help! Colchester Tornado 200 cross slide broken


Results 1 to 2 of 2

Thread: Colchester Tornado 200 cross slide broken

  1. #1
    Registered
    Join Date
    Jan 2018
    Location
    Romania
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Colchester Tornado 200 cross slide broken

    Hi.
    I have a Colchester Tornado 200.
    I had a crash last week. After the turret has been crashed, the cross slide is broken and X Axis ballscrew is doubted.
    I contacted the Colchester 600 UK representative.
    The representative told me that the X Axis ballscrew is ex stock but unfortunately,
    cross slide is no longer available.

    If anyone knows where I can buy a cross slide for the x-axis at Colchester Tornado 200 (or 300 because the cross slide is the same) , new or used please help me.

    Similar Threads:
    Last edited by Gelu; 01-12-2018 at 03:57 AM.


  2. #2
    Activation process ktik's Avatar
    Join Date
    Aug 2018
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    Hi.

    I see that you have a Colchester Tornado 200 and I need your help.

    It happens that one of the memories of the PLC apparently was damaged and I need the information of this so that the machine starts. Can you provide me this information?

    Thank you very much



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Colchester Tornado 200 cross slide  broken

Colchester Tornado 200 cross slide  broken