- Need Help!- Colchester Tornado 200 cross slide broken
-
Registered
Colchester Tornado 200 cross slide broken
Hi.
I have a Colchester Tornado 200.
I had a crash last week. After the turret has been crashed, the cross slide is broken and X Axis ballscrew is doubted.
I contacted the Colchester 600 UK representative.
The representative told me that the X Axis ballscrew is ex stock but unfortunately,
cross slide is no longer available.
If anyone knows where I can buy a cross slide for the x-axis at Colchester Tornado 200 (or 300 because the cross slide is the same) , new or used please help me.
Similar Threads:
Last edited by Gelu; 01-12-2018 at 03:57 AM.
-
-
Activation process
Hi.
I see that you have a Colchester Tornado 200 and I need your help.
It happens that one of the memories of the PLC apparently was damaged and I need the information of this so that the machine starts. Can you provide me this information?
Thank you very much
- Need Help!- Colchester Tornado 200 cross slide broken
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules