colchester cnc 2000l parameter


Results 1 to 6 of 6

Thread: colchester cnc 2000l parameter

  1. #1
    Member
    Join Date
    Feb 2009
    Location
    Egypt
    Posts
    66
    Downloads
    0
    Uploads
    0

    Default colchester cnc 2000l parameter

    does anyone have the full parameter files backed up. I would be thankfull if anyone could e mail them to me.

    thank you all

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: colchester cnc 2000l parameter

    111

    Last edited by mbservice; 08-05-2016 at 08:25 AM.


  3. #3
    Flies Fast Superman's Avatar
    Join Date
    Dec 2008
    Location
    Antarctica
    Posts
    3110
    Downloads
    0
    Uploads
    0

    Default Re: colchester cnc 2000l parameter

    use the "Search" feature.... LINK



  4. #4
    Member
    Join Date
    Feb 2009
    Location
    Egypt
    Posts
    66
    Downloads
    0
    Uploads
    0

    Default Re: colchester cnc 2000l parameter

    wiring diagram does anyone has the wiring diagram as well

    Superman I did already. two problems left spindle not working and I have an 8 staion duplamatic .. in your file I just found 4 duplamatic parameter and 8 staion sauter.



  5. #5
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: colchester cnc 2000l parameter

    Have you initialised the spindle on the rear of the machine, on some of these there was a separate button to bring on the spindle as for the duplomatic that is just a diagnostic turn on



  6. #6
    Member
    Join Date
    Feb 2009
    Location
    Egypt
    Posts
    66
    Downloads
    0
    Uploads
    0

    Default Re: colchester cnc 2000l parameter

    I started working on the machine from the point the monitor did nt even turn on. with a lot of problems starting from memory loss till many boards had to be cleaned. had problem with door closed switch and many more. till now never had a wiring diagram nor the parameter from superman. was later able to enable the plc view. so at least could work my way through that. my problems now are the turret and the spindle not working.

    else i believe everything is working. In supermans parameter 8120 parameters where missing where motor is and direction are described. till i changed them i got 417 427 servo error



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

colchester cnc 2000l parameter

colchester cnc 2000l parameter