Need Help! Tornado A90 with MBF-1000 M19


Results 1 to 7 of 7

Thread: Tornado A90 with MBF-1000 M19

  1. #1
    Member
    Join Date
    Mar 2013
    Location
    UK
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Tornado A90 with MBF-1000 M19

    I am trying to feed hex bar on an A90 with MBF-1000 bar feed. Using M19 can I specify the rotation angle or is this fixed somewhere in parameters and if so where?

    Any help would be very much appreciated...

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: Tornado A90 with MBF-1000 M19

    Clive
    You stipulate the angular rotation in the barfeed page accessed by pressing custom Graph
    If you still cannot find it call me at the RK office and I'll talk you through
    Darren
    Tel 01322 447611



  3. #3
    Member
    Join Date
    Mar 2013
    Location
    UK
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Tornado A90 with MBF-1000 M19

    Quote Originally Posted by rkservice View Post
    Clive
    You stipulate the angular rotation in the barfeed page accessed by pressing custom Graph
    If you still cannot find it call me at the RK office and I'll talk you through
    Darren
    Tel 01322 447611
    Thanks Darren - I must be blind ! Will I have to lock the collet in position in relating to the chuck for this to work consistently (to prevent the collet rotating in the chuck when unclamped) ?

    Regards

    Clive



  4. #4
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default Re: Tornado A90 with MBF-1000 M19

    It depends on how much the collet opens however to be safe i always pin the collet chuck clamp plate to stop movement



  5. #5
    Member
    Join Date
    Apr 2010
    Location
    canada
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default Re: Tornado A90 with MBF-1000 M19

    You can set it in the Bar feeder page after it has homed..............



  6. #6

    Default Re: Tornado A90 with MBF-1000 M19

    Hello, can you send me a message and I will help you install parameters?



  7. #7
    Member
    Join Date
    Apr 2010
    Location
    canada
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default Re: Tornado A90 with MBF-1000 M19

    Hi Salih what is the serial number and the electrical diagram number
    nsafos@canadianmachinetools.ca Phone number 1 647 308 3375
    Nick Safos



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Tornado A90 with MBF-1000  M19

Tornado A90 with MBF-1000  M19