ATTENTION! L. Sakthivel

[600Service]

You sent me a PM, but I cannot reply because your PM box is full!

Answer:

We are having Colchester CNC Lathe 2000L Model with Sauter 8 Station Turret and Fanuc 0T control. Parameters are corrupted and we entered the Back up parameter.

Now machine is working but turret not working in Manual as well as Auto Mode. if we are calling the the Tool code in MDI Mode, Tool code completing without changing the Tool and Displyed the Called tool in CRT tool position.

We feel it seems to be the PC Parameter Setting problem. Can you help us.

Sounds like the diagnostic for the turret is not set. I think D500 should be set to 00001000.

Similar Threads:

• DIY CNC getting some attention
• Attention anyone with a Series II Bridgeport
• Perhaps I'm not paying attention

[L. Sakthivel]

Dear Sir

D500 we set the Same & we tried for the other options also related to turret no improvement.

[cncsolutios]

Dear Sir,
we have the same problem, kindly help us if your is solved.
thanks and regards
devender sharma
info@cncsolutionindia.com

[cncsolutios]

Dear Sir,
Kindly set d500 100
if you need nc and pc parameter
i can send you