LinkBack URL
About LinkBacks
I will do the DIY Machine Plans tonight and post a message when I am done.
Chris
| | |
I need to re-post all the web links from here- http://64.91.234.172/modules.php?name=Web_Links to http://www.cnczone.com/modules.php?name=Links .
All you have to do is cut and paste, I will clean it up as needed. Thanks for all that can help.
Thank You,
Paul G
Site Owner-Webmaster-
Administrator
www.rfqwork.com
www.cnczone.com
www.welderzone.com
I will do the DIY Machine Plans tonight and post a message when I am done.
Chris
Paul I have started on the Aussie ones only to realize I have doubled up some.
The problem is it only shows 4 links at a time. Could you make it show more than just 4 links, that way I could cross check them easier.
Being outside the square !!!
I finished with all 11 links for DIY CNC Machine Plans.
I agree with ynneb, I like to see a long list rather than a short one that I have to keep paging to.
My new Mozilla browser sure is nice with tabs. Rather than going from window to window.
I will check tomorrow to see if there are any more to do.
The new site looks really good!
Chris
Last edited by cbcnc; 07-20-2004 at 02:05 AM.
I will take a look tonight and get some done if there any left
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I finished the "Aussie" ones and the "Misc" ones
I too will have a good crack at some more in the morning.
Just a tip when getting the url for the links. Make sure you dont include the whole url as displayed but just the original url. You will see what I mean.
Being outside the square !!!
Thanks Ben, you watch me go screw it up now
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks guy's, can you guy's do the downloads as well. I have a section for the downloads all I need in the download info and than I have to link the uploads to them on my server.
Thank You,
Paul G
Site Owner-Webmaster-
Administrator
www.rfqwork.com
www.cnczone.com
www.welderzone.com
I will work on the Personel Websites now.
Done.
Chris
Last edited by cbcnc; 07-20-2004 at 02:51 PM.
Paul,
If you simply place the URL in the box for it, when it is displayed no link shows up in the message.
I have been including the link in the message also.
Chris
I will do the Mini Mills and Mini Lathes sections tonight.
Done.
Chris
Last edited by cbcnc; 07-21-2004 at 02:36 AM.
Paul, there are some non-uk links in the UK electronics section, could you have a look please and move them? Not sure whether they are US or Aus links.
Once these are moved I will move the ohere UK links over.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
