LinkBack URL
About LinkBacks
Too many questions presented in one post. Plus, very specific knowledge to respond to your situation.
I haven't anything to offer except
Yea! You might need a shower ;-)
| | |
What is up people? Do I smell bad, deodorant not working for me? I have posted 6 times and only one response to one question? Can my post even been seen by forum members? Hmm? Come on, I need some help!! YES I donated to CNCzone, thought it might help me get a response, I'll shower more often, change deodorant, brush my teeth, and thank any and all who would share their knowledge with us newbs!!
Gecko drives forum
24 views and no response
Trying to put it all together
Open Source CNC Machine Designs
641 views, one response
First CNC router project
General Electronics Discussion
51 views, no response
Trying to understand what I need?
Same question posted in two different areas with nada response?
Paul
Too many questions presented in one post. Plus, very specific knowledge to respond to your situation.
I haven't anything to offer except
Yea! You might need a shower ;-)
I replied a little, but as was mentioned, stick to one question at a time. Sometimes it takes a few minutes to answer a single question, let alone 6 or 7.
A little tip. I'm not going to go to Keling's site and look up the specs of your motors and other stuff. When you ask a question about steppers or other electronics, list the specs with your question. But if your steppers are rates 4 amps or less, then your 12 amp supply should be god for 4 motors.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Paul, how are things going.Originally Posted by KT6G Radio
do you still smell bad.
archie =) =) =)
KC8YND
Posting Permissions
| | |
