| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNCzone Club House Discuss everything in between CNC. THIS IS NOT A TRASH BIN. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-17-2009, 03:49 AM
| |||
| |||
My DMC 63V Z axis drops to the machanical end positon when I hit the enclosure door open switch. Due to which ballscrew bearing clamping bolts shear off or the belt which drives the ballscrew breaks. While running the program this malfunction not observed. It observed when I hit the enclosure door open switch or internal stop switch. It seems that after hitting those switches the motor fourcefully drives the Z axis to the end limit. Power cables and encoder cables are OK. Is the problem is with motor or the drive? Please suggest. Thanks... Atul     |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Deckel Maho DMC 63V Z axis intermittent drop.................need help | alimansyah | Deckel, Maho, Aciera, Abene Mills | 13 | 10-15-2008 11:41 AM |
| I don't have an art drop down menu | Raion | Mastercam | 1 | 09-11-2008 07:25 PM |
| Drop down menus not working in xp (ver 4.0.33) | chevblue2 | Kellyware CAM | 0 | 01-19-2008 12:55 AM |
| compressor causes voltage drop Rev 2 | 1ctoolfool | Haas Mills | 4 | 06-04-2007 06:19 PM |
| Xpress to drop ads? | moyesboy2 | Alibre Design | 4 | 11-01-2005 09:21 PM |
| | |
DMC 63V Z axis drop 
Linear Mode
