New kid on the block

[micfixer]

Hello
I just joined the site and I'm trying to navigate around.
I would like to say hello to everyone. Looking at this site ,it sure appears to be a lot of skilled guys out there. I am a machine repairman for many years .I can see there is a lot more to learn. I am looking forward to being on here.
mike

[fmc575]

you are welcomre

[Machu Picchu]

Hello everyone,
Greetings from Peru,
I joined the site time ago, but this is my first post. Sorry about my bad English, but I think you can understand.
I'm 34 years old and I have more than 10 years working in CNC technical sevice.
My background is CNC programming, electrics, electronics, hydraulics, neumatics, mechanics, CAD-CAD systems, and too much more.
If anyone has some questions I'll be very glad to reply.
See you later.

Machu Picchu

[joim]

Hi, Welcome to this site. Let see I have a problem with the CRT when I pushed the button on the screen does not turn on I check all the fuses seen to be fine, but an alarm lamp ligth on red on the PCB indicating the alarm signal is recieving may be from the power suply unit. the system is fanuc 11M the machie is Shizuoka Mill master B-5V
I don't know what else to check if you want posted because is the firts time using like you I'm new in the block.

I will apreciate my name is Jorge Iglesias, my e-mail jorgei1@mwicorp.com