What is your Coolest Tool??????

[tobyaxis]

This was given to me as a joke when I bought my Manual Mill.

It is an End Mill 3.0 Diameter Combination Shank with 6 inch Length of Cut 8 Flute M42 PCT.

LOL I would have a hard time finding an R8 Collet for this.


Post Pictures of your Cool Tools in this Thread.

[tobyaxis]

Here are a few personal Favorites

On the Left a Hanita VaryMill 4V05 1/2D 4 Flute
On the Right a DuraMill High Performance Aluminum 1/2D 60 Degree Helix 3 Flute
Top DuraMill General Purpose Ball End Mill 3/8D
Bottom DuraMill General Purpose End Mill 3/8D

Cheers!!!!

[Oldmanandhistoy]

I know what my coolest tool is but would probably get banned from the zone if I posted a picture.

John

[tobyaxis]

I know what my coolest tool is but would probably get banned from the zone if I posted a picture.

John

LOL I believe you would . Actually the Thread is about Cutting Tools

[DennisCNC]

toby,

Send that monster my way I'll throw it in my #3 50 taper mill and have my little bro mill some thing up for me.

[tobyaxis]

toby,

Send that monster my way I'll throw it in my #3 50 taper mill and have my little bro mill some thing up for me.

The Shank Diameter is 2.5. Do you have a CAT 50 Holder for it???

[thkoutsidthebox]

My DIY cnc machine.....obviously!

[trooper55]

This was given to me as a joke when I bought my Manual Mill.

It is an End Mill 3.0 Diameter Combination Shank with 6 inch Length of Cut 8 Flute M42 PCT.

LOL I would have a hard time finding an R8 Collet for this.


Post Pictures of your Cool Tools in this Thread.

WOw i think i would have that sucker wall mounted lol that thing is huge i have no cool tools at work WE suck. but awsome thread

[tobyaxis]

Does anyone have a 3" diameter Drill????? There have to be other members with interesting tools.

[SORCHEROR]

i have an 1 1/4 ,6 flute carbie endmill with 3 1/4 cut lenght,and i thought that was big,but i have to admit,your tool is bigger

[jrrdw]

My 3" high speed cut off tool. Has saved me hours of time over the years.

[DennisCNC]

I have a 2" holder but can get a 2.5" i'm sure. I use a 2" endmill quite often, when I don't feel like taking light cuts I also have a 12" shell mill. I might have a 3" drill with a #5 morse end.