Hi, Im Rory, And im an Achohlic Wait Wrong place. Just saying hi, and wanted to say this is a great place i have been reading alot of post on here and there is alot of great info and alot of great people. Thanks to all the people that are posting. I hope after a bit i can start posting some projects and knolage of my own.
Thanks im still a bit green to the CNC part like the G code but im a 3rd genaration Machinest (god i cant spell today). I would just like to know if anyone could point me in a place where i can read up on CNC routers. We run a multicam 3000 with enroute 3.1 for our set up.
Last edited by trooper55; 08-30-2007 at 04:57 PM.
You will likely have better success starting a specific thread in the most appropriate forum.
Keep your questions pointed - be specific with your requests as the more general the question, the less likely someone will be willing to reply.
Generalized questions are typically very difficult to answer quickly and/or accurately.
Consistency is a good thing....unless you're consistently an idiot.
Hi Trooper. Welcome to the forum. Don't be afraid to ask questions. I lurk here and get a lot of good ideas by just quietly reading, but posting questions will generally get them answered pretty quickly.