06-14-2007, 11:25 AM
|
| | | Join Date: Jun 2007 Location: United States
Posts: 1
| |
Allen Bradley series 8400B | |
Hello all,
I'm not sure if this is the right place for this question, but if anyone has an answer, please email me. What Dad knows about computors and what I know about milling machines could easily fit on the head of a needle so please bear with me. He lives in Medford, OR and I am in Boise, ID.
My Father recently purchased a Shizuoka with an Allen Bradley-Bozman 1984 controller, series 8400B Cad #8420BPS. This is his 1st automated unit and he's trying to get it set up.
The diagnostic monitor is flashing error message #08F.35.08
The NMI interupt is active:
CRT Board input
NMI interupt is active:
+15 supply low
The programming/operations manual seems to be missing portions including Appendix A&B and the Error diagnosis section. We aren't sure how much more is missing. If anyone knows where we could find a complete manual, it would be greatly appreciated.
Thanks in advance for any help.
Joe |
Similar Threads 
Linear Mode
