What do you do for a living?

[Netjams]

I work as a Automotive mechanic and have for 32 years now.
Over the years I think I have worked on about every car made that is running around here in the US. It has been a good career over the years, I managed to earn enough to rais 5 kids and my wife was able to stay home all these years. From time to time I have taken breaks from cars and did computer work but that was WAY BACK in the early days of PCs when they needed work ALL THE TIME.
Deep down I hope to stop repairing cars and trucks some day but I think it will be my bread and butter for many years to come, unless I invent something really cool that EVERYBODY NEEDS.

By the way if you ever have any car/truck questions? I would be more then willing to help from time to time.

[Newby2]

Here's one for you.. a 93 Chevy half ton pickup, 212,00+ miles, 350 V8 TBI, 212000+ miles, new injectors, fuel pump, filters, timing chain, ignition components, oxygen sensor, idle speed control valve.
Problem: floods out at idle, and blows black at road speed, floods out at stop sign. NO check engine light (light does work).
Steve

[Netjams]

Originally Posted by Newby2 Here's one for you.. a 93 Chevy half ton pickup, 212,00+ miles, 350 V8 TBI, 212000+ miles, new injectors, fuel pump, filters, timing chain, ignition components, oxygen sensor, idle speed control valve. Problem: floods out at idle, and blows black at road speed, floods out at stop sign. NO check engine light (light does work). Steve

Check the EGR valve, that year and motor is known for the EGR to leak a little vacume. Also that truck is known to do that when the ECM fails. Another thing is make sure the ground wires on the thermostat housing are secure.

[RLC]

31 yrs in the motorcycle industry, opened a parts, accessory and service shop 6 yrs ago. I'll offer the same, if you need to know something about your Honda, Yamaha, Kawasaki, Suzuki or Harley ask away.

[massajamesb]

I treat water for a living, been doing it for years. Believe it or not, I am actually a licensed professional. At least that's what the state keeps telling me....
Been burning and beating metal on the side for years as well. Unfortunately, I am so slow at my metal working I have to work in surface water treatment to make a living.

[ImanCarrot]

Optics. Been making optical components for nearly a quarter of a century. All for military applications which let taks, aircraft, people, missiles see what they are meant to hit.

Funny thing is with the new ISO14000 regulations we have to evaluate the impact on the environment our process make.... environmentaly friendly missiles weirdness or what, I thought they were meant to destroy the environment...

[bill south]

Sterilizatoin Scientist!!!
I design processes for sterilizing disposable medical devices. I use ethylene oxide gas for a sterilizing agent and have a working knowledge of gamma irradiation. I have sterilized millions of cubic feet of product over the last 30 years or so. How did I get into CNC!! Caught the bug!!
Bill from Spartanburg.

[Geof]

Originally Posted by massajamesb I treat water for a living, ....

I do hope you treat it nicely .

I run a small manufacturing company. Actually to be really correct I have people running it for me and I putter around developing new products and tooling and spend time on the Zone alternately helping and irritating people.

[cdlenterprises]

As little as possible for as much as possible...

Manufacturing engineer currently working with metal optics, much like ImanCarrot. Hoping someday to be like Geof and have people run MY place for me while I tinker with new ideas.

[Oce]

Student, Constructional engineer (or at least in 1,5 years)
Give me a pm if your house is coming apart (or you need a new one )

[Apples]

I cut up dead pigs in an abbatoirs, I work in the boning room. It is a very boring repetative job. It just manages to pay the bills.

Peter
Australia

[beone]

Engineer, I work mostly as a consultant in production control and have a software product for scheduling and tracking. home founder fr 25 years, builtmy cnc last year

Dont forget Valentines day 14 Feb.
Dont forget Steak and BJ day 14 Mar