compare all NC simulator software.

[cnc_iniu518]

选用数控仿真软件过来看

上海宇龙仿真软件,通过打通各个省的劳动厅来占领市场,但软件确实不怎么样,侧重考试,仔细用这个软件发现问题很多。网上有破解版，但很多功能都无法使用。下面是该软件正版具有的问题
1、只能在1024X768模式下才能执行录制和回放功能，并且面板尺寸和位置不能改变，否则问题多多。
2、无法随时切换面板
3、无参数化编程功能
4、价格较贵

南京宇航仿真软件，濒死的系统。目前已经没有升级功能(最多支持到2006.02),还有一些bug无法得到更正。网上传有破解版
。同样很多功能无法使用，下面是该软件正版具有的问题。
1、存在不少bug
2、无法升级
3、所谓的破解版实际上简化，很多功能被屏蔽
4、也不具备参数编程功能
5、价格贵

南京斯沃仿真软件(原宇航仿真软件的软件供应商)，免费在线升级(目前已至5.03版)，网上暂无破解版，只有试用版(14天)
该软件试用版无任何功能限制，目前已有28个系统，60多个面板，是目前国系统最全的仿真软件；仿真系统的真实感非常强，感觉比真实的系统还要好。真有些购买的冲动。
该软件的价格适中，
唯一遗憾的是该软件还没有破解版出现。
我个人比较倾向于斯沃仿真软件，也是该软件的忠实拥护者和使用者。

http://www.cncabc.com/bbs/viewthread...extra=page%3D1

[Jojje Bergan]

Selects the numerical control simulation software to look

The Shanghai space dragon simulation software, through makes a connection each province work hall to seize the market, but how did the software not, the stress test, carefully with this software find truly the problem are very many. On the net has explains the version, but very multi-purpose all is unable to use. Below is the question which this software legal copy has.

1, only can be able to carry out under 1024X768 pattern transcribes and playbacks the function, and the kneading board size and the position cannot change, otherwise question very much.
2, is unable to cut kneading board
3, the non-parametrization programming function as necessary
4, the price is expensive

The Nanjing astronavigation simulation software, is on the verge of death system. At present already has not promoted the function (most to support to 2006.02), but also has some bug to be unable to obtain the correction. Net uploading has explains the version. Similarly very multi-purpose is unable to use, below is a question which this software legal copy has.

1, existence many bug
2, are unable to promote
3, so-called explains the version to simplify in fact, very multi-purpose is shielded
4, does not have the parameter programming function
5, the price is expensive

The Nanjing Si fertile simulation software (the original astronavigation simulation software software supplies 商, the free online promotion (at present to 5.03版, on the net not has explained the version temporarily, only then the proof edition (14天 this software proof edition does not have any function limit, at present had 28 systems, more than 60 kneading boards, are the present country system most entire simulation softwares; The simulation system third dimension is extremely strong, felt also must be better than the real system. Really some purchase impulse.
This software price is moderate, it is a pity this software has not only explained the version to appear.
I compare favor the Si fertile simulation software, also is this software faithful supporter and the user.

[bostosh]

I'm still using "N/C Verify" works fine is older but vary capable.

[sdantonio]

I use Vericut NC verification software simulates, verifies, analyzes and optimizes NC tool paths.

[szjinhe]

Pls try to use vericut 6.0.3