| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNCzone Club House Discuss everything in between CNC. THIS IS NOT A TRASH BIN. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-05-2006, 03:11 PM
| |||
| |||
Our SL will not peck drill properly. For example, G98 G83 R.1 Z-1.5 Q.2 Fxx, Instead of feeding .2 and retracting, it feeds .2 then another .2 and another .2 and so on until the finale Z is reached without retracting at all. I think its a parameter thats not set correctly but... No manual. Also its an MSC-516 control. Any help would be greatly appreaciated. Thanks, AJL.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
