LinkBack URL
About LinkBacks
Masochist
| | |
Kinky CNC (or chained to the bench) I just missed an eBay bid on some Motion/cnc equipment, and a check of the winners bid history show that almost all of the rest of his bid history involves purchasing several pairs of Hand Cuffs
What should/can we construe from this
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Masochist
Masochinist?Originally Posted by keithorr
Machinocist ?
Scott
Consistency is a good thing....unless you're consistently an idiot.
Hi all,
I was watching a show on telly recently and people had built machines for um, ahhh, gee how do I say it in a safe manner? These machines were basically doing the job of a guy if you know what I mean, in a porno style of arena.
Part off this contraption was a big linear bearing ( See there is some CNC relevance in this sordid story)
Basically a motor/flywheel/conrod/crosshead design with a, shall we say, rubberised instument on the end of a pole.
Line it up and turn on the switch to the motor!!!!!!!!!!!
Did you miss out on a linear bearing on E bay by any chance??
Cheers M
No, Little-Johnny, pomegranate is not a type of English stone.
Program would be easy:
G1Z5.0F30.0
G1Z0
G1Z5.0
G1Z0
...
only 5??
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Oh my.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Check Out My Build-Log: http://www.cnczone.com/forums/showthread.php?t=6452
Pgm should be all G0.
Dammit everyone we should stop right now before we all get into trouble.
No, Little-Johnny, pomegranate is not a type of English stone.
G0Z0
G0Z-5.0
G0Z0
G0Z-5.0
G0Z0
G0Z-5.0
M08
G04P100000
M09
G0Z5.
Wayne Hill
Question withdrawn
Last edited by fkaCarel; 05-26-2006 at 12:50 PM.
Al.
Last edited by Al_The_Man; 05-26-2006 at 12:53 PM. Reason: Answer withdrawn
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Posting Permissions
| | |
