Am in Truble PLz help

[lakeside]

Is there a key on the controller that say info? Or help your controller manual is most likely loaded in the controller itself

[watzmann]

Finally i got the machine manul from one of my friends , all is fine now with the machine , i rotated the spindle , and i moved the axes , the machine is working well.

my problem now , how to interface the machine with the computer , i need a asoftware to send data to the bridgebort machine , how to get it

[ravin]

u can use TNCREMO DNC SOFTWER

[watzmann]

and how to get it ?

[dipankar]

I need to know that if there is any C.N.C. machine which can cut tapered flange grooves in hot rolling rolls .The taper is from 19 mm to 1.5mm in a depth of about 80mm.Any further information may be provided if asked by any one willing to help.
Dipankar Bhattacharya