Littlemachineshop.com flaky website?

[jester69]

I was all set to order some stuff from them and all weekend the site has been up and down one minute to the next. I'll get in and its OK, add one or two items to the cart, then going for a third it will time out, not found.

Then for a while it will act as if it isn't there at all, then back on eventually for 5 minutes then gone again.

anyone else had that issue or just me?

take care,

Jester

[buscht]

I ordered from them a couple of weeks ago with no problems.
Trent

[jester69]

Originally Posted by buscht I ordered from them a couple of weeks ago with no problems.

For me this started over the weekend and I thought it was my home PC but it is doing it on my work PC too. Could be the way I set up my windows, but I don't think so...

thanks,

Steve

[jester69]

never mind, still busted.

[CJL5585]

Steve,

The internet is not running normally today (Saturday). Everything is very slow and sometimes the screens don't get updated normally.

This usually happens when there is a new virus, or maybe the FBI is tracing or looking for or at some terrorist traffic.

Normally the Little Machine Shop site is a VERY GOOD one, and has lots of information and can furnish ALMOST ANY part for a hobby mill or Lathe. I recommend them very highly and have purchased parts from them.

Jerry

[jester69]

Last saturday and sunday I couldn't get in all weekend. That had to have been them, as every other internet site I went to was fine. This weekend it turns out that it just gave me a problem once, so it was probably nothing, so I was worried for nothing. In other words, oops, sorry.

They come with good recommendations, not saying they are bad at all, just was hoping someone that worked there read this & would fix it, or someone else would pipe up to say they were or werent having the same issue.

Now that the website works again, I have a fairly big order to place. On a lot of things they have great prices & selection.

take care,

Jester