Vibratory polishing aluminum wire rings with glass set jewelry

[Kellis creation]

Hi all! One of my many strong interest is the hand making of wire jewelry. Particularly enjoyable is working with wire and beads of glass or stone. Is there a way that aluminum or sterling wire finger rings,with glass bead sets can be vibratory polished to a mirror finish on aluminum or sterling silver wire with out leaving a satin sheen finish or other wise damage on the glass bead set. The wire size these production art and craft rings run from 22 ga. to 12 ga. Almost always the first happening in making these rings is inserting the wire through a hole in the glass or stone set. and then completing the assembly of the ring. There fore the ring wire and the ring set needs to be simultaneously polished in the same single hopper.

[Ricky Doherty]

I downloaded toolbar and it working well. Thanks sharing us.