program won't run, no errors showing on panel. everything looks ok but when pushing the green button, nothing happens.
Inside the control panel there are about 18 resistors. some of them are
burnt. any idea what they are for?
The best way to learn is trial error.
it turned out that the operator had accidently turned the "tail stock" switch to "on". Simply turning it to off fixed the problem.
I have a Mori SL3. Great machine. The tailstock is interlocked with the spindle. If you have any other questions let me know!
turning it to off fixed the problem.
Welcome to my paintings website - www.wholesaleartmall.com