mach3 question


Results 1 to 6 of 6

Thread: mach3 question

  1. #1
    Registered
    Join Date
    May 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default mach3 question

    Hi guy,not sure if I'm posting this in correct section but need help asap going nuts here. Could anyone tell me whats wrong with my table display? attached are pictures of table display and homing/softlimits

    Similar Threads:
    Attached Thumbnails Attached Thumbnails mach3 question-img_2465-jpg   mach3 question-img_2466-jpg   mach3 question-img_2467-jpg  


  2. #2
    Member Kenny Duval's Avatar
    Join Date
    Jan 2013
    Location
    United Stated
    Posts
    630
    Downloads
    0
    Uploads
    0

    Default Re: mach3 question

    Yes.. You need to set the work zero and regenerate the tool path after you load the G-code file provided the axis are configured correctly.



  3. #3
    Registered
    Join Date
    May 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: mach3 question

    fell stupid now, thank you



  4. #4
    Member Kenny Duval's Avatar
    Join Date
    Jan 2013
    Location
    United Stated
    Posts
    630
    Downloads
    0
    Uploads
    0

    Default Re: mach3 question

    No need to feel stupid. We all start somewhere. A couple years ago I would not have been able to answer that question.



  5. #5
    Registered
    Join Date
    May 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: mach3 question

    well let me ask you this, is there any way of uploading g code below x axis not above like its doing it now I ma drawing in adobe illustrator and g code is done in meshcam



  6. #6
    Member Kenny Duval's Avatar
    Join Date
    Jan 2013
    Location
    United Stated
    Posts
    630
    Downloads
    0
    Uploads
    0

    Default Re: mach3 question

    You'll have to ask the Meshcam users. I'm pretty sure that would be a post processor issue.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

mach3 question

mach3 question