New CNC Machine - Building Stage!

[JavaDog]

So, the Y-Axis Servo Mount had to be re-designed. Turned out I made the standoffs too tall and there was too much side-to-side mis-alignment between the pulleys.

So, just turned the standoffs on their side. Took the spacing from 1.5" to 3/4" - which turned out to be perfect!





Pretty easy fix. Next I am going to post pictures of the electronics and control box - all finished. Then, final pictures of the machine (high-res) and VIDEOS!

[Miata2k]

Maybe I'm missing something here, but Javadog's last post was just over a month ago so I'm wondering if this project finished?

Did Javadog ever post any finished work or videos?

Maybe he is just on vacation..

[margni74]

Originally Posted by Miata2k Maybe I'm missing something here, but Javadog's last post was just over a month ago so I'm wondering if this project finished? Did Javadog ever post any finished work or videos? Maybe he is just on vacation..

Was this machine ever finished. I read the whole thread to find out that it is a mystery whether this machine was finished....