brief info on table
table size (X x Y x Z): 1220mm x 1540mm x 1450mm (48" x 60" x 57")
cut size : 800mm x 1300mm x 100mm (31" x 51" x 4")
laminate trimmer 400w (approx 1/2 hp)
will be used to engrave mdf and acrylic maybe cut mdf up to 3/4"
mdf and aluminium angle construction
originally allthread leadscrews now looking at belt for x and y axis
looking at using keling 425 oz/in 4 axis package (2 motors for x axis)
still considering different software options??
maybe EMC (not sure how I'll go with linux) if not mach3
CAD/CAM still to be determined (to many trial downloads to try out)
anyway heres a few pics to give a better idea of what ive done so far, I look forward to receiving feedback and ideas/advice from all