| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Wood Router Project Log Post your CNC machine building log here only. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#397
 
05-07-2005, 10:29 PM
| |||
| |||
| http://www.amazon.com/exec/obidos/tg...&s=hi&n=507846 http://www.amazon.com/exec/obidos/tg...&s=hi&n=507846
__________________ Proud owner of a Series II Bridgeport.  |
|
#398
05-07-2005, 10:33 PM
| |||
| |||
| I got a really nice 7.5HP VFD on Ebay for only $220. There are good deals if you really look.
__________________ Proud owner of a Series II Bridgeport. |
|
#399
05-07-2005, 10:46 PM
| |||
| |||
| Thanks for those links C.F.. I found the number for an authorized Porter Cable repair center down here and I will be calling them next week to find out pricing on the collets. I look forward to seeing and reading about the progress on your Bridgeport retro fit. Good luck with it.  Carl |
|
#400
11-22-2005, 01:08 PM
| |||
| |||
| Hi cold fsion, I am part way through building a router using 1 inch steel bar, there must be some deflection but i cannot measure it, i am using case hardend R60 steel bar in 1000mm lenths details can be found on my site www.foundry-fopars.co.uk So far i have the X and Z axiis bulit and i am now starting on the "Y", the Z axis is probably over complicated but it works well CNCEzee bad spelling come as standard |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Building a CNC router | HomeCNC | CNC Wood Router Project Log | 230 | 10-18-2009 06:56 AM |
| purchase or building a home cnc router. | s_bedow | DIY-CNC Router Table Machines | 9 | 03-19-2005 12:22 AM |
| Books on building CNC Router? | samualt | DIY-CNC Router Table Machines | 9 | 08-06-2004 07:48 AM |
| My first CNC router: 1.5 years building | hddjohns | DIY-CNC Router Table Machines | 2 | 04-03-2004 10:18 AM |
| Got a jump start on building materials for my CNC Router | Darren_T | DIY-CNC Router Table Machines | 3 | 11-16-2003 07:13 PM |
| | |
Linear Mode
