I finished and have my Model 2006 running Vid included

[silver4dracs]

Well guys after some frustrated nights and days I have my Joe Model 2006 runing very well. I accidently installed the gantry incorrect which made a small mis-alignment in the lead screw. This caused major problems with missing steps. After taking the machine apart I realized that I had also had the double nuts to tight against the bearing blocks. Well needless to say I got everything fixed and the machine is truely great. Here is the video of me cutting the dust collector mounting brackets. Enjoy!

http://www.youtube.com/watch?v=lDWp4ctmaAM

http://www.youtube.com/watch?v=lDWp4ctmaAM

[ccsparky]

Congratulations!!!

Great video! Is that the Hitachi router?

Just started working on my kit today.

Have fun and post pictures of your machine

William

[haciman]

Good machine.

Please motor size and driver name give me

[silver4dracs]

Hobby cnc board. hobby cnc 200 oz stepper z axis, Keiling 495 oz stepper on x and y axis.

[kosymailman]

Congratulations! Really enjoyed the video. Looks like your machine is scooting. Hopefully I can say the same for mine in a month or two.

[magick_man]

i thought the keling 495oz motors were 4 wire and the hobbycnc didnt support 4 wire motors, only 6 and 8.
if it does work than that is great, i was looking at pairing the same motors and driver (before i was told it wouldnt work)

but your machine looks great.

~Magick_Man~

[joecnc2006]

Just my luck I am at my mom's out of town and did not bring my laptop all I have is my pocketpc mobile phone and can not view the video yet. I will see if I can download them and possibly view them.

I am very glad you got it running and working well now. Look forward to seeing pictures as well and the work you do with it I know people like to see results pictures speek for them self in results.

Joe

[joecnc2006]

saw the video finally, looks good, and cutting real good also.

joe

[David Da Costa]

Yep, looks very good, always nice to see Joe design in action.

[joecnc2006]

Just bumped this so people have a resourse for another video to have fun with.

Joe

[silver4dracs]

machine is a work horse! I use it everyday

[joecnc2006]

Can you post pictures of some of the work you are doing with the machine now, I would like to see it and others would also.