I finished and have my Model 2006 running Vid included
Well guys after some frustrated nights and days I have my Joe Model 2006 runing very well. I accidently installed the gantry incorrect which made a small mis-alignment in the lead screw. This caused major problems with missing steps. After taking the machine apart I realized that I had also had the double nuts to tight against the bearing blocks. Well needless to say I got everything fixed and the machine is truely great. Here is the video of me cutting the dust collector mounting brackets. Enjoy!
i thought the keling 495oz motors were 4 wire and the hobbycnc didnt support 4 wire motors, only 6 and 8.
if it does work than that is great, i was looking at pairing the same motors and driver (before i was told it wouldnt work)