Go to 80/20® Inc. - The Industrial Erector Set� and follow link to 3D Parts Stream
of 8020 (3030) end view with CRS attached and one of the cncrouterparts.com carriages. I was going to start a new drawing but maybe some one on here has one they would share. The same in 1530 would work to.
Thanks for the help.
These are Sketchup Files [.skp] aluminum & extrusions - Google 3D Warehouse Search,
but can be exported out of Sketchup as dxf file with use of Download DXF Export for SketchUp - AutoCAD DXF file export plug-in for SketchUp
You might also look here for a translator [skp => dxf or dwf]
3D Modeling Software - Free software downloads and software reviews - CNET Download.com
Thanks everyone. I'm ok at ACAD, I can make a line and join it to another. Has anyone noticed the dxf drawings provided by CNCRP are not to scale? I was able to locate and use some ACAD drawings for the 8020 parts but I would like to be 100% sure on the CNCRP drawings which I'm not. On the CNCRP drawings there are 2 weird lines which I'm not sure what they signify. Even when I have the part scaled to where I think it should be (length = 8.5Ē) the distance between the bearings should be .25 or there about but I measure .2100.
Attached is the end view Iím after, circled in red are the lines Iím not sure of. I understand one bearing moves and I can fix the drawing to where I THINK they should be but will it be 100%?
I think that squiggly line is supposed to be a split lockwasher. You're right as far as moving a bearing since it rides on a slot. That drawing also shows button head cap screws, but actually hex bolts are used.
Attached is a partial view to help you out. I didn't include the whole thing because I changed the lengths of some of the extrusions and it would throw you off if you copied mine exactly. (I didn't bother modeling the lockwasher and bolt on the carriages)
Thanks Lurker, I think your drawings will work.
Are you kidding me??? These are available somewhere on line?
I spent a 'lot' of time making those profiles from scratch in illustrator....
Last edited by Mountaincraft; 04-28-2011 at 09:20 PM.
[URL="http://www.cnczone.com/forums/cnc_wood_router_project_log/124543-mountaincrafts_router_plasma_build_thread.html"][U]4' x 8' CNC Wood Router Project[/U][/URL]
[U][URL="http://www.cnczone.com/forums/woodworking/135576-home_made_drum_sander.html"]Home Made Drum Sander Project[/URL][/U]