Please, can anyone help me on making a surfboard ?
I don't have a CNC yet, but i want to make a surfboard for the next summer.
I've scraped some nice pieces of styrofoam that are 2m X 0.27m X 0.24m.
I've no experience in making surfboards, so, any help is very much apreciated.
I did find an outline on the net but it had no data about the bottom curvature of the board...etc.
I plane to use a hand operated hot wire foam cutter & some jigs i'll make.
So I need :
1) Any file that'll help me make board blanks.
2) Any board outline file.
Last edited by cnc2; 09-27-2009 at 12:37 PM.
I have found some dimensions on the net so, the board should be 2 meters long & 46 to 61 cm wide & around 6 cm thick.
My biggest concern is the rocker design "foil", I have to agree that i never saw a real surfboard in here because people tend to avoid the beach when there are waves.
Any help, any comment is much apreciated
EDIT: I've found a great spreadsheet for drawing the outline here : gummy-stuff.org. and the SurfDesigner at http://www.atuacores.com/surfshop/in...lang=1&info=16
Last edited by cnc2; 09-28-2009 at 12:27 PM.