Wing cutting and 4 axis g-code

[THend]

I want to use g-code to run my 4 axis foam cutter. I am interested in controlling all four axis for cutting wings etc...each axis moves at its own speed and direction.

Now, I have seen the stuff for cutting signs and stuff like that. That is not too difficult.

I am interested in accomplishing what the Guilles Mueller software does, but with g-code or something similar. I need to cut tapered wing cores, and as such each axis moves at its own speed and direction. Then I can use rapids for foam blocking and other functions, and then slow back down and cut the wing.

Does that make sense?

Any ideas?

[romy]

hi THend,

for my little experience DeskCNC is the only software that use the 4 axis Gcode because when you generate a file he's work with X-Y and U-V.

on the market there are many CAM that work for the EDM machine but it's to difficult to obtain a correct g-code easly.

DeskCNC is very easy to use and can work also with router

sorry for my english

bye

[sharbold]

Profili has just added CNC foam cutting with G-code output.

[High Seas]

Thought about Excel?
Not the g-code solution you are looking for - but should do tapered cores.
A fellow in Johor Baru, Malaysia wrote some free software that plugs into Excel 2003. Its VB based as I recall.
A search of the cnczone outta turn it up if you're interested. He also has some 6 axis source code.
Cheers - Jim

[Kroko]

Check out my CNC hot wire foam cutter. It is controlled with CNC USB motion controller which directly supports Profili generated 4-axis g-code.