True 3D foam cutter

[erase42]

bob cad can code for a rotory a axis, but is pretty much the same as fooling it into thinking its cutting linear x that just happenes to be wrapped around something, there are settings in bobcad for 5 axis as well, however i have no experience with it even tho i do use bobcad so anything i say has to be run thru a BS filter first

[astatue]

Hey Thksoutsidebox cool idea. but foam cools too fast. and would clog your vac line right away. but good Idea.

Everyone else. ROTARY CUTTER, ROTARY TABLE AND X AND Z. will get at 95% of the places you need for most figures. hand finish the rest.

[moki]

Have a look at this site. They sell these types of machines. Maybe you can get an idea as to how it is done! http://www.foamcutter.pl/index.php?id=239