Foamcutter Rebuild

[small_rcer]

This will Test your knowledge of French. But the design is simple and elegant. Also appears to be very inexpensive using Skateboard bearings. I figured I could use 2 pieces of 1x1 hollow aluminum bolted as longtitudinals with a few 1x1 spacers to give a 1x3 beam in lieu of his 15x50mm hollow section which I can't find a close size locally.
oops forgot the link.

Link is
http://grenadeindoor.modelisme.com/cnccompact.htm

Jim H

[gguidi]

Originally Posted by gguidi I just finished my cnc foam cutter. Photos can be found at this linkhttp://www.depronlasercutting.com/foam.html I am running CeNeCe cutting at about 20 Gary Guidi Depron Laser Cutting

I have decided to sell this cutter I have never used it. Anyone intersted please let me know.

Gary

[svenakela]

Originally Posted by gguidi I have decided to sell this cutter I have never used it. Anyone intersted please let me know. Gary

Use the classified section.