| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Swiss Screw Machines Discuss CNC Swiss Screw Machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-20-2009, 04:53 PM
| |||
| |||
We bought a used Citizen E32 (1986 machine) and are in the process of getting it set up. We are able to 'home' all the axes except the opposed toolpost (Y axis). When we move the tool post away from the turret we get an overtravel limit alarm at about the halfway point. There are 4 limit switches on the back but the 'actuators' are no where near tripping any of the switches. If anybody can help or offer suggestion it will be greatly appreciated! Thanx!  |
|
#2
09-21-2009, 11:26 AM
| |||
| |||
| Your local Citizen dealer should be able and willing to help with this over the phone. NJ office is 201-818-0100 Good Luck. |
|
#3
11-24-2010, 09:12 AM
| |||
| |||
| Press & Hold CB/CAN button while jogging Y axis. Or while powering up machine press & hold CB/CAN button, this over-rides all soft overtravel alarms on 300 & 500 series Mitsubishi controls. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem- z-axis overtravel at tool change | jam-man | Okuma | 4 | 11-12-2009 09:19 AM |
| WTB: Citizen Tool setter F25 | PixMan | Want To Buy...Need help! | 0 | 07-18-2009 06:51 AM |
| ElectroHead (opposed to PetrolHead) says hi! | hrh | CNCzone Club House | 0 | 01-03-2009 09:41 AM |
| Finding gangtool for citizen L16 back tool | mkmk123 | CNC Swiss Screw Machines | 4 | 07-07-2008 08:39 AM |
| Citizen tool pre-setter | yoopertool | CNC Swiss Screw Machines | 13 | 09-18-2007 06:54 AM |
| | |
Linear Mode
