NOMURRA HELP - CNCzone.com-The Largest Machinist Community on the net!

BAD DOG · #1 11-14-2007, 06:07 PM

GOT IN A NUMURRA NN20

SIDE LIVE TOOLS ARE OFF CENTER (Y AXIS) HAD TO PUT .280 IN THE OFFSET IN ORDER TO LINE UP ON CENTER.

SOMETIMES THE PROGRAM WORKS AND OTHER TIMES IT ALARMS #412
NC OP ERROR

BAD DOG

chunkymonkey · #2 11-15-2007, 01:52 PM

WHY ARE YOU OFF .280? HAVE YOU TRIED G28V0? THIS SHOULD SEND IT HOME. THEN YOU CAN TRAM YOUR MACHINE IN.

chunkymonkey · #3 11-15-2007, 02:14 PM

ALSO ARE USING A UB B2 B3...ETC???

BAD DOG · #4 11-15-2007, 03:32 PM

SERVICE MAN HAD TO GO INTO PARAM. AND SET A NEW ZERO POSITION.

TURNS OUT THE MACHINE DOESN'T LIKE HAVING THAT LARGE AN OFFSET

WORKS FINE NOW.

THANKS

BAD DOG

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)