LinkBack URL
About LinkBacks
I would say, that it is doable, though it will not be much fun!Originally Posted by elsanch
Good luck.
| | |
anybody ever single point a 4-40 thread on sub spindle? onle like.120 length of thread on 304 ss? (.125 dia barstock?)
I would say, that it is doable, though it will not be much fun!
Good luck.
Control the process, not the product!
Machining is more science than art, master the science and the artistry will be evident.
Probably need to add an R value to comp for deflection. Are the threads at the end of the part? If so, thread rolling would provide a better and faster process.
Posting Permissions
| | |
