I need to mill a cam on into a shaft. I have never used g7.1 and am wondering if someone could post a basic cylindrical interpolation program in the x/c axis. It doesnt need to be fancy. Im milling a .170" (circular cam, constant radius) on a .250 shaft, offset from center .040.
If you have one handy I'd be curious to see a program for an increasing radius cam as well.
I'm seriously not trying to offend here, but your control manual should get you on track, if all else fails run a straight up cylindrical program and just do a Y/core offset, the machine should take a .040 offset.