Bar Feeder turned off by mistake!

[obieron]

Does anyone know where to toggle the bar feeder on and off in either the Diagnostic bits or Parameter bits?
We have a Tsugami SX26 BS26B with a FANUC LA1 (0TT) control and have just gone through zero point setting after breaking a belt on one of the axis and replacing. During which the instructions required turning on and off bits in the Diagnostics ... namely No. 0544 according to the instructions. During this time several hands were in the control and the BAR FEEDER was turned off by mistake and we now can't turn it on. I accidently stumbled onto turning bit 4 on in Diag No. 0540 which is at the top of the page .... someone was thinking they were on 0544 my mistake. I have the parameter txt file but not the diagnostic txt file to compare.
Maybe someone could thumb through their screen if you have that machine with a bar feeder?
Any help would be greatly appreciated!

[DCogswell]

As in "no power" to the bar feed? Or it won't read your barfeed torque on-off code from the program?

[obieron]

Well ... again Gary Mankus got me goin. The Diag No. 540 bit, (keep relay) was turned off for the bar feeder. We found a text copy on the PC of the parameters but not the Diagnostics No. ... Gary emailed me a copy of the kee relay's and timers and their functions.
Thanks again for your support.