milling surface finish

[mkhairi]

I'm using STAR machines for 5 years and producing huge amount of pushers and crowns for watches.Need some advice about milling program cause it's hard to get a good finishing surface with those power driven spindles.I'm using GLOOR cutters and they are the best.Having wavvy cutting surface is the biggest problem and I'm still working on that.

[hacdlux]

have you checked for axial&radial runout/ deflection on your arbor

we also use gloors( 38mm x 7/32 saw ), i have mine ground stagger tooth. cuts the noise way down and feeds faster and smoother

[mkhairi]

Thanks.
those staggered really are strong.I've check my spindles concentricity and they are good (0.008) runout.Problem is I'm cutting stainless steel-316L and the tool 20mmx2.0mmx5.0mm hole to fit into a holder with 16 teeth of half round shape that's need to cut 20times each pieces.Maybe you had some answers for it.ANYWAY thank's a lot man.SEE YA.....