Helical Milling Citizen L632

[chet470]

Does anyone have any proving code for helical milling on a L32? I am going to mill a thread using a single point thread mill & want to get started on the right foot.
I recently tried helical milling on a L720 and couldn't seem to get it to work.
Thanks

[ProProcess]

arcing in and arcing out aside, it's pretty straight forward.

G1 W.125F???
G2K-.125U-.062F(U IS YOUR THREAD PITCH IN DIAMETER)
G2K-.125U-.062
G2K-.125U-.062
G2K-.125U-.062
G1W-.125
G0X???

HTH
Good luck.

[cogsman1]

(HELICAL MILL )
(#511=DIAMETER OF CIRCLE)
#511=*
(#512=CENTRE OF CIRCLE)
#512=*
(#513 =FEEDRATE)
#513=*
(#514=TURNED DIAMETER)
#514=*
(#515=DEPTH OF CUT)
#515=*
(#516=NO OF SPIRAL STEPS)
#516=*

M5 G98
M80 S3=*
T**00
M18 C*
G50 W-0.591
G0 X#814+0.025 Y0 Z#512 T*
X#514+0.025
G19
G1 G41 W#511/2 F#513
G3 Z#512+[#511/2] X[[#514+0.025]-[#515*2]]V0 K-#511/2 P#516
G1 G40 Z#512 F40.
G18
G0 X#814+0.025 T0
G50 W0.591
M20 M82 G99

From CNC Wizard.