Need Help!- Citizen A32 Z70-0001 Zero position error

[smellyfeet]

Hi,

Does anyone have the procedure for clearing the error " Z70 - Abs posn ref pt set incomplete 0001 Z2 $2"


Thanks.

[g-code_junkie]

Originally Posted by smellyfeet Hi, Does anyone have the procedure for clearing the error " Z70 - Abs posn ref pt set incomplete 0001 Z2 $2" Thanks.

reference z2

[g-code_junkie]

Originally Posted by g-code_junkie reference z2

You can find the information,in the operators manual,under zero return.

[smellyfeet]

Thanks G-Code junki but that was obviously the first thing I did.

The machine would not zero as per the manual so I phoned Citizen and the guy in the service dept told me it was the batteries, so I changed them, no difference, just compounded the confusion.

Asking around, Someone told me to turn it off again, then on again but before pressing the on button, press the off button first.

Perfect???

[g-code_junkie]

Originally Posted by smellyfeet Thanks G-Code junki but that was obviously the first thing I did. The machine would not zero as per the manual so I phoned Citizen and the guy in the service dept told me it was the batteries, so I changed them, no difference, just compounded the confusion. Asking around, Someone told me to turn it off again, then on again but before pressing the on button, press the off button first. Perfect???

When you tried to perform the zp-exe did you get any overtravel or other alarms?