Does anyone have a older Citizen B12 chuck sleeve?

[PoiToi]

Hi all, the chuck sleeve on our older (1995) Citizen B12 has started to develop cracks.

We welded it back into working order once, but it did not last very long, and a new one is 3-4 weeks out from the factory.

Does anyone have a check sleeve they can part with? Please email me if so and we can work something out. I'm not looking for a freebie.

jon_ingram@precision-turning.com

For reference, the sleeve is about .905" diameter(that fits into the spindle) and 3.5" long.

thanks so much!!