08-29-2009, 08:01 PM
|
| | | Join Date: Aug 2008 Location: USA
Posts: 8
| |
Howdy gang!
"OK, what does this anti-rust mix do, how does it compare to plasma quench? How much was the plasma quench w/shipping? Is sodium nitrate and borax mix safe for my girly hands? How about passing employees getting splashed (on accident)?
I have heard to many pros and few cons for the water table. The exhaust type seems to be just the opposite. We don't worry about "heat" during the winter but we do worry about it in the summer (As I type it is 106f) here in so cal.
WSS"
I have my hands submerged in our water table very many times during the day, and I have not noticed any problems in the least from the chemicals. A couple of others in the shop also use the cutter quite often and have not had any issues either. Additionally there is no evidence of staining or harm to fabric that I can tell.. the sodium nitrite I dont have enough info on, but the borax is used as a water softener and particularly a clothes washing additive to enhance the efficiency of laundry detergents.
With the dilution I used, I dont think that this solution is strong enough to cause any problems with most people. The chemicals are not known for having a caustic nature unlike some others that might be used in water systems for corrosion prevention.  |
Similar Threads 
Linear Mode
