Need Help!- Lantek software controling Plasma/Punch press

[PerB]

Hello

I have just installed a new Plasma/Punch combination machine

To program the machine we use Lantek Expert software.
Im new to both Lantec software and plasma machine

My problem now is as follow.
I often has quite long parts to cut. About 1500mm in X axis
But the parts are only about 150mm in the Y-axis

So the long sides I want to use the quicker punch and the short sides I want to use the plasma since there is often a complex contour.

The Lantek software only want to cut the complete contour of the parts or punch it.
I cant mix plasma and punch on the same contour

Do anyone here use Lantek software and know how to solve this problem?

[RAVENEXTREME]

Hello. I just finished reading your post. Did you already have found the solution ? Hope so Anyway i may have the solution Say something
Take care