| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Plasma and Waterjet Machines Discuss building, operating CNC Plasma, waterjet and EDM machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-08-2009, 08:35 AM
| ||||
| ||||
Does anyone have this file ( Using3Mill.pdf ) available to view? Its no longer at the machsupport website...    |
|
#2
07-08-2009, 11:21 AM
| ||||
| ||||
| What about this one? Probably mostly the same? I don't recall seeing one with the name Using3mill. http://www.machsupport.com/docs/Mach3Mill_1.84.pdf
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
07-08-2009, 02:03 PM
| |||
| |||
| I have a copy of Using3Mill.pdf In looking at it there is a big "PRELIMINARY" stamped on it. The one referenced by Gerry is the update version of this file George |
|
#4
07-09-2009, 08:14 AM
| ||||
| ||||
| I'm interested in looking at a specific page - Section 12.2 called Torch Height Control Interface which contains schematics by Tom Caudle. As far as I can tell the new mach support files no longer contain this information. |
|
#5
07-09-2009, 09:08 AM
| ||||
| ||||
| Those schematics might be on the Yahoo group
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
| Sponsored Links |
| |
|
#6
07-09-2009, 10:52 AM
| |||
| |||
| Download Mach 2 manual Mach2.6.11.pdf It has this section George |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
