| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Plasma and Waterjet Machines Discuss building, operating CNC Plasma, waterjet and EDM machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-14-2009, 07:37 PM
| ||||
| ||||
Building a floating head Z axis for mounting Plasma. When wiring the micro switch. Do I use the NO or NC contacts for signal when torch touches off on the surface of the sheet being cut. Edit Note: Tom answered my question on the CandCNC help board...... NO or the same as all other home switches.
__________________ If it works.....Don't fix it!    |
|
#2
06-14-2009, 09:17 PM
| |||
| |||
| Tom beat me to it then! Yes, normally open  . |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| THC Floating head needs to be spring loaded? | Normsthename | CNC Plasma and Waterjet Machines | 3 | 12-12-2007 08:44 AM |
| Floating Tap Head - Advice Please | UKRobotics | General Metal Working Machines | 3 | 10-23-2007 09:03 PM |
| Floating head on Kress router | zoltan | Mechanical Calculations/Engineering Design | 3 | 03-02-2007 08:52 AM |
| Floating head / switch pics? | KKamel | CNC Plasma and Waterjet Machines | 1 | 02-01-2007 12:07 AM |
| Floating Head Switch? | Redline | CNC Plasma and Waterjet Machines | 9 | 09-18-2006 09:21 AM |
| | |
Linear Mode
