| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Plasma and Waterjet Machines Discuss building, operating CNC Plasma, waterjet and EDM machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
05-30-2009, 08:36 PM
| |||
| |||
The plasma cutter I am building has two servos for the x axis. The problem is that they are not spinning at the same speed. I can't seam to find the problem. This is what I have tried so far-- - the settings in the VSD-e servo drivers are set the same -I have Mach 3 set to slave X axis and A axis together -I have the motor tuning portion for mach 3 the same for both x and a axis Both servos are spinning the correct direction. Any ideas if this is a servo driver setting problem, a Mach 3 motor tuning problem, or something else? Thanks for the help Steve    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Z axis problem | zephyr9900 | Tormach PCNC | 7 | 12-20-2009 08:43 PM |
| Need Help!- problem x axis | jlviloria@gmail | Fanuc | 9 | 09-27-2008 08:33 PM |
| Need Help!- ref axis problem | destro | Machines running Mach Software | 1 | 06-28-2008 12:25 PM |
| z axis problem | UMASSREHAB | TurboCNC | 1 | 09-29-2006 06:45 PM |
| Z-axis problem | Trainhound | Machine Problems, Solutions , Wireless DNC, serial port | 3 | 12-14-2005 03:24 PM |
| | |
Linear Mode
