| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Plasma and Waterjet Machines Discuss building, operating CNC Plasma, waterjet and EDM machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-23-2008, 05:28 AM
| |||
| |||
Hi, I'm trying to determine which post processor I need for my plasma table. I'm using sheetcam, great product by the way. Following is a copy and paste of a simple NC file that I know works. G70 G91 G00X2.500Y46.750 G41M15 F110.0 G01X0.000Y-0.500 G01X0.000Y-45.750 G01X-2.000Y0.000 G01X0.000Y45.750 G01X2.000Y0.000 G01X0.250Y0.000 M16G40 G00X2.500Y0.500 G41M15 G01X0.000Y-0.500 G01X0.000Y-45.750 G01X-2.000Y0.000 G01X0.000Y45.750 G01X2.000Y0.000 G01X0.250Y0.000 M16G40 G00X-5.500Y241.750 M00 G00X The table has the following specs. Koike - D7 Cutting Tips Coordinate Drive Control System Type: LYNX System: 6D55181G04 Control/Amplifier: 6D55179G03 Thanks, Tim Last edited by twooten; 01-25-2008 at 02:55 AM. Reason: needed to change title  |
|
#2
01-25-2008, 02:02 PM
| |||
| |||
| Post this in the SheetCAM section on the zone or on SheetCAM's Yahoo Forum. The author monitors both and can give you assistance. Since there are no Z moves the THC is stand-alone and there are special M codes that are specific to your controller. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
