How do I convert a cnc routor to a water jet? - CNCzone.com-The Largest Machinist Community on the net!

ariel 1 · #1 02-17-2007, 05:41 PM

I have a small cnc router (3' x 3'), that I would like to convert to water jet.
What would I need? Any ideas or suggestions where I might look for info?
I am looking to cut stained glass and maybe stainless 6064 or 7074.
Like what kind of pump?

ger21 · #2 02-17-2007, 07:02 PM

Originally Posted by ariel 1

What would I need?

Lots and lots of $$$$. While a lot of people talk about it from time to time, I've never seen anyone who was able to build one.

millman52 · #3 02-18-2007, 11:24 AM

From what I understand Ger21 is right. The water jet pump alone is mega bucks!!!! Then there is containing the mess, reclaiming your abrasive, Pretty major project. But don't let us discourage you. If you can afford it & then make your money back on operating the machine. Go for it....

ViperTX · #4 02-18-2007, 01:40 PM

Search this site about home build water/abrasive jets.....we've discussed it a thousand times.

Ron22 · #5 02-19-2007, 08:28 AM

You could try something like this
http://www.wardjet.com/MSeries.asp

ariel 1 · #6 02-19-2007, 05:43 PM

Hey, Thanks for all your comments, it has helped me alot.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Water cut??	Yepez	CNC Plasma and Waterjet Machines	8	02-24-2010 08:23 AM
Water Cutters	UKRobotics	CNC Plasma and Waterjet Machines	17	01-05-2008 03:05 PM
Water transfer techniques for water table?	Knut	CNC Plasma and Waterjet Machines	3	02-02-2007 09:52 AM
Just add some water to the chips...did you add some water to the chips	carbidecraters	Fadal	13	02-03-2006 11:53 AM
looking for water jet in LA	the4thseal	Employment Opportunity	7	11-14-2005 06:58 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)