AWJ builders

[Perp]

I have been considering buying an abrasive water jet for architectural/custom stone cutting. I currently sub this work out to a company with an Omax 55100. It seems to be a very good machine and the parts it make for me are perfect, however I am wondering if this is kinda overkill. If I were to buy an AWJ, maybe I should not spend so much as i do not need .003 on my parts? any opinions? what I would like is if some of you could help me out with a list of AWJ manufacturers (other than OMAX) so i can do some research and shop around a bit. advice, recommendations, etc. are welcome.

[Dale Heart]

No matter what you do... a 50hp pump and bits and pieces and head are going to cost you $80k... before you even look at a table. Is that the road you want to go down for table tops?

[Dale Heart]

I also know a good company. Check your PM box.

[Richel]

Richel, Inc. is the largest reseller of used waterjets in the U.S. and Canada. We also ran a waterjet job shop for several years. So, we have run, repaired, and modified waterjets from nearly every manufacturer. Feel free to give us a call at 330-677-9100 and we can talk to you about the advantages of the different machines. We can also send you a list of the prices for all of our used machines.