| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Plasma and Waterjet Machines Discuss building, operating CNC Plasma, waterjet and EDM machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-13-2006, 08:00 PM
| |||
| |||
I found this step motors. IBM PN2526734 EC347580 Model GPF3945-2A Step angle 2º volt DC 4.5V AMP DC 1.4A/phase insul. Class B rating cont. How do I control them? Please low budget. They are 6 wires bipolar I asume.  |
|
#2
08-14-2006, 09:41 AM
| |||
| |||
| First you need drivers. Those motors will work with either bipolar or unipolar drives Xylotex HobbyCNC Then you need Controller Software (runs on the PC to talk to the motor drives) TurboCNC (DOS) MACH3 (Windows) The mechanics of a table are a completely different subject and there are dozens of ways to approach it. |
|
#3
08-14-2006, 11:04 AM
| |||
| |||
| If you are interested in a 1000 Dollar solution for 3 drives, controller and software ( which supports G-codes and DXF/HPGL ), please mail me at intface@vsnl.com Thanks Iyer |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
