| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| CNC Plasma and Waterjet Machines Discuss building, operating CNC Plasma, waterjet and EDM machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-19-2006, 04:25 PM
| ||||
| ||||
I just thought I would let people know that EMC2 now has all the features required for plasma cutting with Torch Height Control. Some of these features are still experimental but will be stable and shipped with EMC version 2.1 along with a sample config (my own table). The configuration is made for: CandCNC MP1000-THC/THC-500 http://www.candcnc.com Bob Campbell/Jim Cullins THC 300 http://www.campbelldesigns.com For more information see: http://wiki.linuxcnc.org/cgi-bin/emc...Height_Control Yours Jarl http://dallur.com    |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
EMC2 (Open Source) Plasma Control w. THC 
Linear Mode
